How to Fix Electric Scooter Water Damage in 5 Easy Steps

Did you know electric scooters are susceptible to water damage? Yes, you heard it right! And if you’re thinking, “But it’s an electric scooter, isn’t it supposed to be waterproof?” then think again. Even the slightest water exposure can cause severe damage to the electric components of your scooter. But don’t panic! There are a few simple steps you can take to fix it. 

Water damage can be a real pain, but it doesn’t have to be the end of the world for your scooter. The first thing you should do is turn off the scooter and unplug the battery. Don’t try to turn it on and see if it works, trust us, it won’t. Next, dry off the exterior of your scooter with a towel. If the scooter is completely soaked, you may need to disassemble it and dry off the individual components. 

I once got my scooter wet in a rainstorm. I was really worried that it was ruined, but I followed these steps and it worked like a charm! It’s essential to let your scooter dry completely before attempting to turn it on again. This means leaving it to dry indoors for at least 24 hours. Afterward, reconnect the battery, turn it on, and give it a test run. You may need to take it to a professional repair shop if it’s still not working. 

So if your scooter gets wet, don’t despair! Just follow these steps and you’ll be back on the road in no time. Remember to always be cautious when using your electric scooter around water and avoid riding in heavy rain or puddles.

The first step is to remove any excess water.

So, you’ve been cruising around on your electric scooter and suddenly, the skies open up and it starts pouring rain. Or maybe you accidentally rode through a puddle that was deeper than you thought. Either way, your scooter is now soaking wet and you’re wondering what to do next.

Well, fear not my friend! The first step in fixing electric scooter water damage is to remove any excess water. Grab a towel and start blotting away at the wet spots. Don’t be afraid to really get in there and soak up as much water as you can. Just make sure not to rub too hard or you could damage the paint or finish of your scooter.

ix Electric Scooter Water Damage

And whatever you do, DO NOT use a hair dryer or any other heat source to dry it off. You might think you’re doing your scooter a favor by speeding up the drying process, but all you’re really doing is risking further damage to the electronics. Trust me, you don’t want to be the person who turns their electric scooter into a glorified paperweight. So stick to the towel and take your time.

Once you’ve removed as much water as possible, you can move on to the next step in fixing your waterlogged electric scooter.

The second step is to disassemble the electric scooter.

Congratulations! You’ve made it to step two of your electric scooter water damage rescue mission. Now, it’s time to channel your inner mechanic and disassemble that baby. Don’t worry, it’s not as scary as it sounds. First things first, grab your toolbox and locate the screws holding everything together. This will allow you to inspect the components and dry them thoroughly.

But hold up, before you start unscrewing everything in sight, take a deep breath and remember to be careful not to lose any screws or other small parts. You don’t want to end up with a pile of parts and no clue where they go. Trust me, I’ve been there. As you start taking apart the scooter, make a mental note of each piece and where it came from. You can even take pictures or make a diagram to help ensure you can put it back together again. And who knows, maybe you’ll impress your friends with your newfound mechanic skills.

So, get cracking on that disassembly, and let’s get that electric scooter back on the road, or should I say, back on the sidewalk.

The third step is to inspect the components.

Now that you’ve taken the electric scooter apart and identified all the parts, it’s time to get down to business and inspect each one for water damage. Think of it like playing a game of detective, only instead of looking for clues, you’re searching for signs of corrosion and rust. If you find any damage, don’t panic – this doesn’t mean your beloved scooter is beyond repair. Simply grab a bucket of mild soap and water solution and get to scrubbing. Don’t forget to use a soft-bristled brush to ensure you don’t further damage any of the components. 

As you’re inspecting each part, think about the role it plays in your scooter’s overall functionality. Is it a critical component, or more of a nice-to-have? This will help you prioritize which parts to focus on and how much time and effort to invest in each one. And remember, even if a part looks fine on the outside, it’s always a good idea to take a closer look and make sure there isn’t any hidden damage lurking beneath the surface. 

In conclusion, inspecting your electric scooter’s components for water damage may seem daunting, but with a little bit of wit and determination, you’ll be able to identify any issues and get your scooter back up and running in no time. Just remember to take your time, be thorough, and have some fun with it – after all, who said fixing things couldn’t be a little bit entertaining?

A fourth step is to dry the components.

Ah, the dreaded electric scooter water damage. It’s like a nightmare come true for any scooter enthusiast. But fear not, my dear reader, for all hope is not lost.

The fourth step in fixing your electric scooter after water damage is to dry the components. Easy peasy, lemon squeezy, right? Well, let me tell you, it’s not as simple as it sounds. You can’t just grab any old rag and start wiping away the moisture. No, no, no. You need a clean cloth for this job. And I don’t mean some old T-shirt you found lying around. I’m talking about a fresh, clean cloth that’s ready to absorb all that pesky water.

But what if the cloth isn’t enough, you ask? Well, my friend, that’s where a hair dryer comes in handy. But don’t get too excited, you can’t just set it to max heat and blast away. Oh no, that would only make things worse. You need to use the cool setting to ensure you don’t cause any further damage.

So, to recap, step four is all about drying the components. Use a clean cloth and a hair dryer in a cool setting, and you’ll be one step closer to getting your beloved electric scooter back on the road. See? I told you it wasn’t so bad.

This is the final step in reassembling the electric scooter.

Congratulations! You’ve made it to the final step in fixing your electric scooter’s water damage. You’ve taken apart each component and dried them off, and now it’s time to put everything back together. It’s like a puzzle but with screws and wires instead of pieces.

Before you start, make sure all the parts are completely dry. You don’t want any residual moisture lurking around. Once you’re sure, it’s time to get to work. Start by placing the battery back in its compartment, followed by the motor. Next, attach the handlebars, making sure they’re securely fastened. Finally, attach the wheels, and give them a good spin to make sure they’re rolling smoothly.

And voila! You’ve successfully reassembled your electric scooter. But wait, don’t forget the most important step – tightening all of the screws. You don’t want parts flying off as you zoom down the sidewalk. So, take your time and make sure everything is securely fastened.

And that’s it! You’ve fixed your electric scooter’s water damage like a pro. Now it’s time to take it for a spin and show off your new handyman skills.


In conclusion, if you’re in a pickle because your electric scooter got soaked in water, fear not! There are some things you can do to fix it. First of all, don’t panic. Take a deep breath and assess the situation. Is the damage minor or major? If it’s minor, you might be able to fix it yourself. If it’s a major, you might need to take it to a professional. 

Assuming that you’re feeling adventurous and want to try fixing it yourself, the first step is to dry it out. This means taking out the battery and letting it dry completely. You can use a hair dryer, but make sure to keep it on a low heat setting to avoid damaging any internal components. 

Once it’s dry, check for any visible damage. Are there any cracks or dents? If so, you might need to replace some parts. If everything looks okay, try turning it on. If it doesn’t work, don’t give up just yet. You can try replacing the battery or the motor. 

If all else fails, you might need to take it to a professional. They have the tools and expertise to fix any water damage. Just be prepared to pay a hefty fee. 

So there you have it. With a little bit of patience and some elbow grease, you can fix your electric scooter after it’s been exposed to water. Who says you can’t have fun in the rain? Just make sure to dry off your scooter afterward. Happy scootering!

The data source for all images and details: YouTube

FAQ section

How long does it take to fix electric scooter water damage?

The answer to this question depends on the extent of the damage and the availability of replacement parts. However, a general estimate is that it can take anywhere from a few hours to a few days to fix electric scooter water damage. The faster you act, the better your chances of restoring your scooter to its original condition.

How much does it cost to fix electric scooter water damage?

The cost of fixing electric scooter water damage varies depending on the type and model of your scooter, the parts that need to be replaced, and the labor charges of the repair shop. However, a rough estimate is that it can cost anywhere from $50 to $500 to fix electric scooter water damage. The cheaper option is to do it yourself if you have the skills and tools, but if you are not confident or experienced, it is better to seek professional help.

How can I tell if my electric scooter has water damage?

There are some signs that can indicate if your electric scooter has water damage. Some of them are:
The scooter does not turn on or charge
The scooter makes strange noises or smells
The scooter has visible corrosion or rust on the metal parts
The scooter has cracks or leaks on the plastic parts
The scooter has condensation or moisture on the LCD screen or the lights
If you notice any of these signs, you should inspect your scooter for water damage and take action accordingly.

Can I ride my electric scooter in the rain?

The answer to this question depends on the IP rating of your electric scooter. IP stands for Ingress Protection and indicates how well a device can resist dust and water exposure. The higher the IP rating, the more resistant the device is to water. For example, an IP54 rating means that the device can withstand splashes of water from any direction, while an IP67 rating means that the device can be submerged in up to 1 meter of water for up to 30 minutes. However, even if your electric scooter has a high IP rating, it is still advisable to avoid riding it in heavy rain or wet conditions, as this can increase the risk of accidents and damage. You should also dry off your scooter after riding it in the rain and store it in a dry and sheltered place.

Join the electric revolution with Tensela - your gateway to a greener future on two wheels!
Bobby paul
Bobby paul
Articles: 35

Leave a Reply

Your email address will not be published. Required fields are marked *